Best Quality ETFE Film for Solar Module

• Material: ETFE
• Kind: Plastic Bar
• Tensile Strength: 81~130MPa
• Content: Pure Material
• Filled Materials: 15%/25%
• Quality: High Quality
• Model NO.: ETFE Film
• Color: White
• Transport Package: Export Wooden Box
• Specification: 1500*1500mm
• Trademark: SHINGCHEM
• Origin: Shangdong
• Production Capacity: 200/Month

Product Description

Best quality ETFE Film for Solar Module

 

ETFE (Ethylene-tetrafluoroethylene copolymer)
Characteristics: It's similar to FEP, but it has better mechanical Property.
Application fields:It's widely used in acid resistance and alkali resistance injection products, electric wire, cable, valve lining and spray painting.
ETFE Technical Parameter:
Physical Performance	Specific Gravity (g/CM3)	1.73-1.79
	Melting Flow Rate(g/10min)	10-25
	Melting Point (ºC)	270
	Refractive index	1.4
Mechanical Performance	Tensile Strength (MPa)	>=18
	Breaking Extension (%)	200-400
	Compression Intensity (MPa)	11
	Shore Hardness	60
	Coefficient of Kinetic Friction	0.4
Thermal Performance	Maxi mal Temperature of Continuous Work (ºC)	180
	Thermal Distortion Temperature (ºC) (1.82MPa)	74
	Coefficient of Linear Expansion *105 (K-1)	9.0-9.3
Electrical Performance	Volume Resistivity (Ω·CM)	>1017
	Insulation Breakdown Voltage (3.2mm)	16
	Relative Dielectric Constant (1KHz)	2.4-2.6
	Dielectric Loss Angle Tangent Value (tanδ) (X106Hz)	<0.0005

 


ETFE film for solar modules, LED packaging, Semiconductor releasing, Architechture and Aircraft.

Features:

* High light transmittance- the transmittance is over 95%

* High conversion rate- increase PV module power efficiency by more than 10%

* Weather resistance- long-term exposure remained unchanged for more than 20 years

* Chemical stability- no affected by acid, alkali, oxidant and almost all of the solvent.

* self cleaning- The surface is clean and non-stick

* Flame retardant- reach UL94 standard V-0 flame retardant level

* covenience- Follow the conventional component packaging process

* Abrasion performance-- friction coefficient 0.06
 

Density	Melting point	Light transmittance	Tensile strength	Elongation at break
1.73~1.74	270ºC	95%	40~50MPa	300~400%

Standard Grades

Thickness	Width	Length	surface state
25um	1250mm	100~500m/roll	Inside/outside: Matting Inside/outside: Corona