| Customization: | Available |
|---|---|
| CAS No.: | 9002-84-0 |
| Formula: | C3h4f4o |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PTFE(Polytetrafluoroethylene) is a fluoropolymer that is resistant to heat and chemicals. Because of its various properties, PTFE continues to be used in a wide range of innovative projects. It is possibly one of the most familiar mechanical plastic products applied today. Metal products coated with PTFE have a greater performance in various aspects.
| PTFE FINE POWDER DF-2046 | ||
| ITEM | DF-2046 | |
| EXCELLENT GRADE | FIRST GRADE | |
| CLEANESS | EXCELLENT GRADE | FIRST GRADE |
| BULK DENSITY g/L | 475±100 | |
| TENSILE STRENGTH Mpa≥ | 25 | |
| ELONGATION AT RUPTURE%≥ | 300 | |
| MOISTURE CONTENT % ≤ | 0.03 | |
| STANDARD RELATIVE DENSITY | 2.180-2.220 | |
| AVERAGE PARTICLE SIZE μm | 400-575 | |
| HIGHEST COMPRESSION RATIO | 1000:1 | |
| EXTRUSION PRESSURE Mpa | 20-35(400:1) | |
| THERMAL INSTABILITY INDEX≤ | 30 | |
| MELTING POINT ºC | 327±5 | |
| PROCESSING METHOD | PASTE EXTRUSION | |
| USAGE | Mainly used for low compression ratio extrusion, processing thick wall tube, etc. | |
| ADVANTAGE | Good transparency | |
| PACKING, STORAGE AND TRANSPORTATION | 1.Packed in double-layer plastice bag inside, and hard board drum outside with the quality certificate on it. 20kg per drum. 2.Transported as non-dangerous chemical, prevent from humidity, intense vibration and package damage. 3.Stocked in clean, cool and dry warehouse, prevent from dust, mositure or other impurities. |
|
| PTFE FINE POWDER DF-2046A | ||
| ITEM | DF-2046A | |
| EXCELLENT GRADE | FIRST GRADE | |
| CLEANESS | EXCELLENT GRADE | FIRST GRADE |
| BULK DENSITY g/L | 475±100 | |
| TENSILE STRENGTH Mpa≥ | 25 | |
| ELONGATION AT RUPTURE%≥ | 300 | |
| MOISTURE CONTENT % ≤ | 0.03 | |
| STANDARD RELATIVE DENSITY | 2.160-2.220 | |
| AVERAGE PARTICLE SIZE μm | 400-575 | |
| HIGHEST COMPRESSION RATIO | 1000:1 | |
| EXTRUSION PRESSURE Mpa | 20-35(400:1) | |
| THERMAL INSTABILITY INDEX≤ | 30 | |
| MELTING POINT ºC | 327±5 | |
| PROCESSING METHOD | PASTE EXTRUSION | |
| USAGE | Mainly used for low compression ratio extrusion, processing thick wall tube, etc. | |
| ADVANTAGE | Good heat resistance | |
| PACKING, STORAGE AND TRANSPORTATION | 1.Packed in double-layer plastice bag inside, and hard board drum outside with the quality certificate on it. 20kg per drum. 2.Transported as non-dangerous chemical, prevent from humidity, intense vibration and package damage. 3.Stocked in clean, cool and dry warehouse, prevent from dust, mositure or other impurities. |
|
| PTFE FINE POWDER DF-2048 | ||
| ITEM | DF-2048 | |
| EXCELLENT GRADE | FIRST GRADE | |
| CLEANESS | EXCELLENT GRADE | FIRST GRADE |
| BULK DENSITY g/L | 475±100 | |
| TENSILE STRENGTH Mpa≥ | 25 | |
| ELONGATION AT RUPTURE%≥ | 300 | |
| MOISTURE CONTENT % ≤ | 0.03 | |
| STANDARD RELATIVE DENSITY | 2.160-2.220 | |
| AVERAGE PARTICLE SIZE μm | 400-575 | |
| HIGHEST COMPRESSION RATIO | 3000:1 | |
| EXTRUSION PRESSURE Mpa | 45-70(1700:1) | |
| THERMAL INSTABILITY INDEX≤ | 20 | |
| MELTING POINT ºC | 327±5 | |
| PROCESSING METHOD | PASTE EXTRUSION | |
| USAGE | Major use to paste extrusion in the conditions of middle. High reduction ratio . process thin-wall tube, electric wire cable ,etc. | |
| ADVANTAGE | Better electrical performance, thermotolerance. | |
| PACKING, STORAGE AND TRANSPORTATION | 1.Packed in double-layer plastice bag inside, and hard board drum outside with the quality certificate on it. 20kg per drum. 2.Transported as non-dangerous chemical, prevent from humidity, intense vibration and package damage. 3.Stocked in clean, cool and dry warehouse, prevent from dust, mositure or other impurities. |
|
){kind=link}