| Customization: | Available |
|---|---|
| CAS No.: | 24937-79-9 |
| Formula: | -- |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
 Applications |
|||
| · Injection molding | |||
| · Good mechanical properties balance | |||
| Test Condition | Unit | Typical Values | |
| Physical properties | |||
| 23ºC | g/cm3 | 1.35 | |
| 800ºC,30min | % | 30 | |
| Mechanical properties | |||
| 50mm/min | MPa | 125 | |
| 50mm/min | % | 2.5 | |
| 2mm/min | MPa | 8500 | |
| 23ºC | kJ/m2 | 9 | |
| Thermal properties | |||
| 1.80MPa | C | 185 | |
| - | C | 222 | |
| Other properties | |||
| 48 hours after tool | % | 0.3-0.5 | |
| - | mm/min | 39 | |
| Note: The data above is a typical value for reference, not a guaranteed value. The data will vary with tool design such as gate type , gate location, gate number, injection molding process and part thickness. The data will vary with different color as well. Prior to use the material, please consult with Sunway polymer. | |||
| Processing Conditions | Range | ||
| Melt Temperature | 240-270ºC | ||
| Rear | 240--250ºC | ||
| Center | 255--265ºC | ||
| Front | 260--270ºC | ||
| Mold Temperature | 50-80ºC | ||
| Pre-Dry needed | 100ºC, 4-8h | ||
| Note: The above process condition is only for reference. The actual process should be adjusted according to different types of machines, mold design and product design. | |||
){kind=link}